Brewday: Rye Witbier
June 3, 2012
As we keep getting closer to the homebrew competition, I had just one beer left to brew for it: the rye beer. The only restriction for the beer is that it has to include rye for at least 30% of the grain used. I’ve brewed a lot of rye beers over the years, and I decided that most entrants would likely use rye pale ales and rye IPAs, so it was time I tried a different approach.
Part of what makes rye so great in a beer is that it adds a bit of dry spicy character, and a bit of an earthy aroma, so I wanted to add it to a non-pale ale style that would really benefit from the heavy use of rye. I figured a witbier would be an interesting and unique experiment. I made a wit recipe with a heavy dose of rye malt replacing a lot of the wheat malt, and was ALMOST tempted to add some peppercorns, but decided against it. So the grain bill for it was:
- 6.50 lb Pils malt
- 3.50 lb Rye malt
- 1.00 lb Flaked wheat
The water additions were pretty light, just 5 grams each of calcium chloride and gypsum. I mashed it on the cool side, around 147F, to try and make sure it attenuated really well. This one should have a nice dry body to accentuate the spicy rye character. Unfortunately, the lautering went really slow for the first two gallons before I realized there was a piece of grain partially clogging the ball valve in my mash tun. After blowing that out and running a vorlauf again, the runoff went as smoothly as it usually does.
The hop and spice schedule on this one was fairly light:
- 0.75 oz Challenger (60 minutes, 5.6% Alpha Acid)
- 0.50 oz Challenger (15 minutes)
- 10 gm Coriander (15 minutes)
- 0.50 oz Challenger (End of Boil)
The other odd thing about this batch was the yeast I used for it. My previous saison, the peppercorn saison I brewed for my 100th batch last month, had its saison yeast crap out halfway through fermentation. It refused to start back up and was left sitting really thick and sweet, so I made a starter of my Northwest ale yeast that was on hand and poured that in to get fermentation going again. That did the trick, but left me with a blended yeast cake to work with, so I thought that would be interesting to use for this rye witbier. These two yeasts should do pretty well at drying out the body and giving some nice character to the beer.
Also, starting gravity was 1.045, as I was aiming for a nice light session beer for the coming warm months.