With the Belgian pale ale and Belgian dubbel both done fermenting and going into kegs, it was time for me to get one last batch out of this yeast. I figured that it’s been a long time since I made a big beer, so now was the time to get back into it.

Belgian quads, or dark strong ales, have been a personal favorite for a long time, but I’ve never actually brewed one. I started with aromatic malt and special b to build up the malty backbone of the beer and all of the dark fruit and caramel flavors. To keep the beer from getting too thick while increasing the alcohol, I used Turbinado sugar, which gives a hint of dry molasses to a beer (in my experience). So the whole grain bill was:

  • 15.50 lb Pilsner malt
  • 2.50 lb Munich malt
  • 1.75 lb Aromatic malt
  • 1.25 lb Special B
  • 2.00 lb Turbinado sugar

The hop schedule was light and mellow, as they’re really only there to balance some of the sweetness and add a little complexity to the aroma.

  • 1.00 oz Northern Brewer (9.6% Alpha Acid, 60 minutes)
  • 0.75 oz Northern Brewer (15 minutes)
  • 1.00 oz Spalter (5% Alpha Acid, End of Boil)

The one spice I used in the beer was 10 grams of licorice root. We use it in our Abbey Ale at work, and I really like that kind of mouthfeel it adds to a dark beer. This was added 15 minutes before the boil ended.

For such a large beer, the lauter was extremely smooth and uneventful for this batch. It took about 40 minutes to collect a bit over 8 gallons of wort. As it was really thick, I wound up under-boiling it, so I got 7 gallons post-boil and ran 5.5 gallons of that into the fermentation tank. The gravity came in a little low because of the underboil. 1.094 is still fine, and still gives me 75% efficiency with my system, which is higher than I was expecting for a high gravity beer.

The water additions were minor in this one. Two grams of calcium sulfate, three grams of calcium chloride, and four grams of calcium carbonate. The mash pH was 5.53 and the temperature was 149F, so perfect conditions to get a highly fermentable wort. The yeast was pitched at 68F, and I’m hoping to get it to rise up to about 75F over the next day or two to really get that yeast’s character to show through.

Now it’s on to planning my 100th batch…